Машина не найдена? Запросите информацию
Свяжитесь с нами +32 492 277 280
APT International распологает площадью более 30 000 м2 в Бельгии. Более 3000 станков всегда в продаже!
Машина не найдена? Запросите информацию

Schafer SVRM 4050 x 40/50/60 mm

Технические характеристики:

  • Кол-во валов4 rolls
  • Усилие4050 x 40/50/60 mm
  • Диаметр верхнего вала560 mm
  • Кол-во приводных валов4 rolls hydr driven
  • Требуемая мощность110 kW
  • Вес72 ton
  • Подгибкаyes

Дополнительная информация

  • Type: SVRM 4R - Linear
    4 rolls individually hydraulicaly driven = no slip, specifically for conical rolling
    4 hardened rolls
    6 digital readouts
    conical bending, smallest diameter of cone is 1100 mm
    with the toproll you can process both thin and thick plates (hydraulic crowning of top roll)
    max speed: 7,5 m/min (variable hydraulic speed)

    High accuracy machine because it uses linear guides for the side rolls, which means that the side rolls cannot deflect in any way! (new machines are no longer manufactured with linear guides due to high costs, instead planetary guides are used which are inferior)

    Machine is equipped with backload feature > a tilting cylinder which is connected to the top roll; this allows the operator to apply upwards or downwards backload to the toproll to counter act deflection of the top roll = crowning of the top roll > incredibly rare feature!

    Machine is equipped with a shock absorber system which is useful to calibrate a rolled workpiece after welding. With this shock absorber system the machine is able to handle the seam resulting after welding. When rolling the part and the seam passes between the top and bottom roll the shock is not transferred to the bearings and the machine is not overloaded.

    Another unique feature about this bending roll is it's increased capacity for pre-bending, here you need to multiply the platethickness by 1,8. For example a plate with a thickness of 40 mm x 1,8 = 72 mm. Standard you would have to multiply by 3, for a plate of 40 mm this would equal to 120 mm.

    During the rolling process all other hydraulic movements can be executed at the same time.
    2 hydraulic plate support systems (left and right) for rolling large diameter workpieces
    hydraulic vertical topsupport to support sheet during rolling, max diameter of workpiece with this support is 6300 mm



  • Тип модели: SVRM 4050 x 40/50/60 mm
  • Номер каталога: O.06 14113
  • Главная категория : [O] Листогибочные прессы, вальцы, лазерные станки, плазменные станки, кординатно-пробивные прессы, линии профилирования, правильные станки
  • Подкатегория: [O.06] Вальцы
  • Производитель: Schafer

Номер каталога: O.06 14113

Просмотр видео этой машины

Получайте рекламные акции и самую свежую информацию
Попробуйте нашу новую систему Оповещения

APT International

  • De Tonne 73, Industriezone 5
  • 9800 Deinze, Бельгия

Нужна помощь?

+32 492 277 280

Контакт Золотов Евгений

To Top