Vous n'avez pas trouvé la machine que vous cherchiez? Contactez-nous
APT International possède 30.000 m² de stock en Belgique et 3.000 machines disponibles immédiatement
Vous n'avez pas trouvé la machine que vous cherchiez? Contactez-nous

Fraiseuses a banc mobile & CNC Johnford X: 4100 - Y: 2800 - Z: 800 mm CNC 5 axes

Information technique

  • Course longitudinal axe X4100 mm
  • Course transversal axe Y2800 mm
  • Course en hauteur axe Z800 mm
  • Dimensions table de serrage4200 x 2400 mm
  • Puissance sur la broche principale30 kW
  • Cône de brocheBT 50
  • Nombre de vitesses max.6000 rpm
  • CommandeHeidenhain TNC 530
  • Longueur G -- D11055 mm
  • Largeur Av -- Ar6320 mm
  • Hauteur4140 mm
  • Poids45 ton

Informations complémentaires

  • Type: DMC-4100LH
    2800 mm between columns!!
    MA-25 2-axis universal milling head - 20 kW - 6000 rpm
    > C-range: 0-360°
    > A-axis range: +/- 110°
    Cooling door spindle 40 bar
    Total power: 67 kW
    No foundation needed!

     Johnford DMC Series double-column moving table bridge mill is created from a one-piece Meehanite cast iron bridge/column assembly that reportedly takes up 30 percent less floor space than comparable C-frame vertical machining centers. Available in both moving table and sliding column (fixed-table) versions, ranging from 36- x 36- x 30-inches of travel up to 60-ft. x 20-ft., the bridge mills have a long base casting with complete support of the table over the full 51 inches of Y-axis travel, allowing massive loads to be machined.

    The Y and Z axes hold fixed loads at all times while the X-axis carries the only dynamic load allowing for tight machining and tight tolerances during high-speed machining operations. Because there is no table overhang, X-axis pitch and yaw are eliminated. The spindle centerline-to-column distance is minimized offering further rigidity. The machine's heavily ribbed cast iron construction provides long tool life and part surface finish. The combination of twin screw-type conveyors and a caterpillar conveyor ensures complete chip removal with little manual cleaning. Additionally, finite element analysis (FEA) is used to design each bridge mill, simulating the effects of real world conditions, including vibration, heat, fluid flow and other physical impacts.



  • Type/Modèle: X: 4100 - Y: 2800 - Z: 800 mm CNC 5 axes
  • Numéro de Stock: B.03 14271
  • Catégorie principal: [B] Fraiseuses
  • Subcatégorie: [B.03] Fraiseuses a banc mobile & CNC
  • Marque: Johnford

Numéro de Stock: B.03 14271

Des promotions dans votre boîte aux lettres
Essayez nos nouvelles Service alerte