Tornos con husillo de cilindrar y roscar Froriep DS 2000-13/IV - Ø 4000 x 13 000 mm
Información téchnico
- Distancia entre centros 13 000 mm
- Volteo sobre bancada 4000 mm
- Volteo sobre carro transversal2220 mm
- Diámetro agujero husillo principal95 mm
- Potencia eje principal70 kW
- Peso140 ton
- Maximo peso entre centros100 ton
Información adicional
- Special lathe for turning turbine shafts / large pulleys / large rotors / large pistons
Type: DS 2000-13/IV
Lathe is equipped with 2 cross-slides:
- one is mounted on a chassis bed installed next to the main chassis of the lathe
- one is mounted on an upper chassis bed on top of the main chassis of the lathe
- the upper chassis bed is also movable on top of the main chassis of the lathe
Max length of workpiece on main chassis: 13 meter
Max length of workpiece on top of upper chassis bed: 6,5 meter
Max swing in gap using main cross-slide: 4000 mm
Max swing over bed using using secondary cross-slide: 2700 mm
Max swing over cross-slide: 2220 mm
- Tipo/Modelo: DS 2000-13/IV - Ø 4000 x 13 000 mm
- Numéro stock: A.01 12798
- Categoría principal: [A] Tornos
- Subcategoría: [A.01] Tornos con husillo de cilindrar y roscar
- Marca: Froriep
Numéro stock: A.01 12798
Ver video de la maquinaria