Johnford X: 4100 - Y: 2300 - Z: 800 mm CNC
Información téchnico
- Carrera mesa longitudinal (eje-X)4100 mm
- Recorrido transversal de cabeza (eje-Y)2800 mm
- Altura de recorrido cabeza (eje-Z)800 mm
- Dimensiones de mesa4200 x 2400 mm
- Pasaje entre montantes 2800 mm
- Admision en husillo (ISO) BT50
- Potencia en husillo 30 kW
- Control (tipo)Heidenhain TNC 530
- Numero de ejes5 axes
- Cambiador de herramientasyes
- Numero de portaherramientas 40 toolpositions
- Rango de rotaciones (de X a Y rpm) 6000 rpm
- Longitud L – R 11055 mm
- Profundidad frente – atras 6320 mm
- Altura4140 mm
- Peso45 ton
Información adicional
Type: DMC-4100LH
2800 mm between columns!!
MA-25 2 axis universal milling head - 20 kW - 6000 rpm
> C-axis range: 0-360°
> A-axis range: +/- 110°
Cooling through spindle 40 bar
Total power: 67 kW
No foundation required!!
Johnford double columns are created from massive Meehanite iron
castings. These bridge mills have a long base casting with complete
support of the table over the full X-axis travel, allowing massive loads
to be machined. The Y and Z axes hold fixed loads at all times while
the X-axis carries the only dynamic load, allowing for tight machining
and tight tolerances during high-speed machining operations. Because
there is no table overhang, X-axis pitch and yaw are eliminated. The
spindle centerline-to-column distance is minimized offering further
rigidity.
The machine’s heavily ribbed cast iron construction provides long
tool life and part surface finish. The combination of complete surround
table guarding with twin screw-type conveyors and a caterpillar conveyor
ensures complete chip removal with little manual cleaning.
Additionally, Finite Element Analysis (FEA) is used to design each
bridge mill, simulating the effects of real world conditions, including
vibration, heat, fluid flow and other physical impacts.
The DMC-4100LH feature rigid box ways
in Y and Z and Schneeberger roller ways in X for high load carrying
capacity. Heavy duty 35HP, 2 speed gearbox driven spindles
provide heaving cutting power and torque.
- Tipo/Modelo: X: 4100 - Y: 2300 - Z: 800 mm CNC
- Numéro stock: D.01 14271
- Categoría principal: [D] Centros de mecanizado
- Subcategoría: [D.01] Centros de mecanizado verticales
- Marca: Johnford